Dryer

First group of materials would be non-absorbent material like PP, PE which humidity would only stay on their surface. This surface humidity can be removed by blowing hot air. Therefore using dryer to dry this group of material is the best choice.

THD model dryers of NBM

• Two types of double-layered, stainless steel or carbon steel to prevent heat loss.
• Equipped with highly precise temperature controller.
• A silicon compartment to prevent dust from entering the storage tank.
• Convenient in changing material.
• Unique design for uniform distribution of heat, high efficiency and reduction of drying period.
• 24 hour timer to program drying times.

Dehumidifiers

• Second group of materials which mostly comprised of engineering plastics such as ABS, PA and PC, highly absorb moisture and it is absorbed by the core of these materials. So the best method to dry these material is using dehumidifier.

Dehumidifier first removes the humidity of the inlet air and then by blowing hot and dry air, makes dries the material.

Low power consumption 3 in 1 dehumidifier performs as dehumidifier, dryer and autoloader which occupies less space and performs better dehumidification.

NBM dehumidifiers features

• Reduced energy consumption) energy consumption reduced to 0.6 Kw per hour, which is 2.5 Kw per hour for other brands in the market).
• Double layered and stainless steel with unique design to prevent heat loss.
• Equipped with high quality part to reduce maintenance cost and increase the life.
• Equipped with closed-loop system for hot and dry circulation and preventing outside humidity absorption, it has smart microprocessor to control pre heating and probable setting errors.