• Clamping force from 90 to 2600 Ton.
• Equipped with 3^rd generation servo motors and pumps made by YUKEN in japan and servo drive made by well-known brands which results in 20% to 80% saving in energy consumption in comparison with fixed pump machines.
• Operation with low noise production.
• Machine high performance during overload condition.
• Using hydro mechanical mechanism for fast and precise mold adjustment.
• Special design with uniform stress molding technology and rigidity of the clamping unit is up by 30%.
• Special anti-tilt platen support design and low pressure mold protection can effectively protect the mold.
• Optimized design of injection unit increases the rigidity, ensures coaxiality of the forces on motion and injection and reduces the resistance.
• High-efficiency mixing screw is standard on the whole series of machine, considerably increasing the plasticizing efficiency and quality and achieving outstanding color mixing effect.
• Mold protection precise adjustment using KEBA controller.
• High production ability and repeatability due to closed loop system.

Note: closed-loop system have been explained in Hydraulic System and control unit

• Repeatability of mold-open position:

In 60 to 120 ton less than 1mm.

In 160 to 560 less than 2mm.

• Static temperature control accuracy <±1°C.
• Usage of expandable Type of KEBA.